Call 000 000 0000
Illustration for the Westminster tip: How and When to Descale a Tankless Water Heater

How and When to Descale a Tankless Water Heater

A Westminster hot water tip, with sources.

Call 000 000 0000Placeholder number while the live line is set up.
  • Phone only
  • No forms
  • Tank & tankless
  • Gas, electric, heat pump
Illustration

Last updated

Descaling a tankless water heater means circulating a mild acid solution through its heat exchanger to dissolve mineral scale. In West Orange County, where water is generally considered hard, many manufacturers recommend it about once a year. It's one of the most important pieces of tankless maintenance, and many warranties depend on it.

Why scale matters

Westminster's water is a blend of local groundwater from the basin managed by the Orange County Water District and imported water from the Metropolitan Water District. Like most Orange County water, it carries calcium and magnesium. When a tankless unit heats water rapidly, those minerals coat the narrow passages of the heat exchanger. Scale insulates the metal, so the unit overheats, throws codes, delivers less hot water and wears faster.

Signs it's due

  • A scale or maintenance code on the display
  • Overheat or flame codes that come and go
  • Less hot water, or temperature swings at normal flow
  • A year or more since the last descaling

Rather explain it out loud? One call covers it.

Call 000 000 0000

What you need

  • A small submersible pump and two short washing machine hoses
  • A five-gallon bucket
  • Descaling solution approved by the manufacturer, or white vinegar if the manual allows it
  • Isolation valves on the unit's hot and cold lines, with service ports

If your unit has no isolation valves, adding them is the first step. It's a job for a provider, and it makes every future descale simple.

Step by step

  1. Turn off power to the unit and close the gas valve.
  2. Close the hot and cold isolation valves.
  3. Connect one hose from the pump to the cold-side service port, and the other from the hot-side port back into the bucket.
  4. Fill the bucket with the descaling solution, following the product's directions.
  5. Open both service ports and run the pump, circulating the solution through the unit for the time the manual specifies, often about 45 to 60 minutes.
  6. Turn off the pump, drain the solution and flush the unit with clean water for several minutes.
  7. Close the service ports, remove the hoses and open the isolation valves.
  8. Remove and rinse the cold-water inlet filter screen, then reinstall it.
  9. Restore gas and power, run a hot tap until air clears, and check for leaks.

Dispose of the used solution according to local rules. Check with your city if you're unsure.

How often

Many manufacturers suggest about once a year in hard water. A softener or scale-reduction filter ahead of the unit may stretch that. Follow your manual, and keep a record, since many warranties require proof of maintenance.

When to call instead

Call if the unit has no service valves, if codes continue after descaling, if you see leaks or if you'd rather not handle the chemicals. A provider can also check the burner, flame sensor, venting and gas pressure during the visit. See tankless water heater repair.

Westminster notes

Westminster is in Orange County, California, and its water heater permits come from the city's Building Division. Water is generally considered hard, and the city sits a few miles from the coast, so both sediment and corrosion come up often. Nearby cities issue their own permits, so check the official links on each area page.

Want a second opinion by phone?

Call the number on this page and explain what you're seeing, the heater's type and age and what you've already tried. Give your Westminster address or cross streets, and ask whether you're covered. You'll get an answer on the call, not a callback days later.

When it's time to call

Call if the problem keeps returning, if there's water on the floor, if the fix means opening gas, vent or electrical parts, or if you're deciding between repair and replacement. Have the label details ready, plus your address or nearest cross streets.

Sources checked

Reviewed November 13, 2026. Confirm anything important with the agency, since rules and programs change.

Quick answers

Can I use vinegar to descale my tankless water heater?

Some manufacturers allow white vinegar; others specify their own descaling solution. Check your manual. Using the wrong product can damage parts or affect the warranty.

What happens if I never descale my tankless unit?

Scale builds up, efficiency drops and the unit runs hotter. Eventually it may shut down with codes, and scale can damage the heat exchanger, which is the most expensive part to replace.

Westminster-area hot water, sorted by phone

Calling from Westminster, CA? Describe the heater, ask whether your address is covered, and hear the next step. Call to check availability.

Call 000 000 0000
No hot water in Westminster?Call 000 000 0000